When you add modifications to your vehicle, the original programming is not adapted to the modifications
made to it. A dynamometer reprogramming minimizes the risk of engine failure on a vehicle that has been mechanically modified. That being said, adding performance to a vehicle will never make it more reliable. For most of the vehicles we work on, we have not observed any premature engine failure following one of our reprogrammings. Of course, it is important to understand that we are not immune to an engine that was already damaged or in the process of being damaged before we reprogrammed it.

Of course! If we have misadjusted a parameter on your vehicle, we will be happy to fix the problem. However, you should not confuse programming problems with mechanical problems. If the vehicle was fine when it left the dynamometer, the chances of a programming problem appearing are very slim. We take the time to make sure that your vehicle is running perfectly before letting it leave, this is one of the reasons why our customers very rarely come back with problems related to our work.

In general, it is very simple, you have to make the engine breathe as much as possible, therefore changing the exhaust system and the air intake on the engine.

370z (09-21) | G37 (08-13) | Q40 (14-15) | Q60 (14-15) | G35 (07-08) | 350z (07-08)
-ISR Test Pipes or ISR Longtube Headers to achieve maximum gains
-Catback Exhaust (Exhaust System)
-K&N Drop In or Intakes 3in. AdminTuning filters (3 inch air intake tube) to get the maximum gains

Q50 (14-15) | 350z (03-06) | G35 (03-06)
-ISR Test Pipes or ISR Longtube Headers to achieve maximum gains
-Catback Exhaust (Exhaust System)
-K&N Drop In Filters

Q50 (16-22) | Q60 (16-22) | Z (2022)
-Lower Down Pipes
-Catback Exhaust (Exhaust System)
-K&N Drop In or Cold Air Inlet filters to achieve maximum gains

UpRev & Ecutek are both software that we use to modify the parameters of your engine computer in order to get more power out of it. Both require a license that must be registered on the vehicle's computer, without it we cannot access the required parameters. Although UpRev works great for 2003 to 2008 models, we do not recommend it for any vehicle newer than 2008. Ecutek is a much more complete software and allows us to get better performance. Ecutek, for example, allows us to control the number of PSI entering the engine with turbo configurations. But that's not all, it also allows us to put in "FlexFuel" sensors that will allow our programming to adjust itself, without having to touch anything, no matter how much ethanol (E85) you add to the vehicle's gas tank.

This varies greatly between each vehicle, but generally between 1 hour and 3 hours. It all depends on the cooperation of the vehicle, we cannot give a precise time for this question unfortunately.

Nissan GTR R35 (09-2021) - Ecutek
-Original Engine/Turbos + Basic Modifications + 91/94oct........................................................ON REQUEST
-Original Engine + Improved Turbos + Basic Modifications + 91/94oct...................................ON REQUEST
-Original Engine + Improved Turbos + Basic Modifications + 91/94oct + Ethanol (E85).......ON REQUEST

G37 | 370z | G35 | 350z | Q40 | Q50 (14-15) | Q60 (14-15)

If your vehicle is equipped with Cruise Control, you will have 4 different ''Maps'' on its programming.

🏁Map1 Race (Race)
This is the programming that will have the most HP, this is where we push the vehicle to the maximum while respecting its limits.

🔥Map2 Flames (Off Road)
This programming will have the same HP as Map1, however when decelerating at high RPM you will have the choice to create pretty flames. We must mention to our customers that this function is only usable off-road in the best of worlds😉.

♻️Map3 Fuel Saving
This programming will have less HP but by the same fact, it will have a lower fuel consumption than Map1 or Map2.

❌Map4 Anti-Theft
This programming completely cuts off the fuel injection, so it is impossible to steal the vehicle. Please do not use while driving!



Q50 (16-22) | Q60 (16-22) | Z (2022)

♻️Map1 Fuel Saving
This programming will have less HP but by the same fact, it will have a lower fuel consumption than Map2.

🏁Map2 Race (Race)
This is the programming that will have the most HP, this is where we push the vehicle to the maximum while respecting its limits.


💥 Map3 Crackle Pops (*Optional)
We do not recommend crackle pops for VR30 engines as in the long run they will damage the turbos.



Nissan GTR R35

For the GTRs we let the customer decide what programming he wants.

For vehicles containing UpRev:

-Continuously press the cruise control 'Cancel' button on your steering wheel
-While holding the ''Cancel'' button press down on the ''Set'' button the number of times respective to the Map you want
-For example, 2 times for Map2 or 4 times for Map4

For vehicles containing Ecutek:

-Press the cruise control 'Cancel' button on your steering wheel until the RPM needle moves
-When it has moved, select the desired Map with the ''Set or Accel'' button
-For example, leave the needle at 2000 RPM for Map2 or 4000 RPM for Map4. No need to press any button again to select a Map. Just leave the needle where necessary and the Map will select itself.

For vehicles containing UpRev & ARC or Ecutek it's very simple:

- Clutch pedal compressed all the way
-Gear lever in 1st gear
-Gas pedal compressed to the bottom

If your Launch Control used to work, but now it doesn't: Probably the sensors on the clutch or brake pedal need attention.

In order for the vehicle to start properly, you must remove the anti-theft map before starting the vehicle. So turn the ignition to "On" (No accessories) and change the map to one of the others installed on your computer.

The Anti-Theft Map should NEVER be used while driving. This is mentioned in person to each customer.

The 2007 G35s and 350z have a common problem, the engine computer needs to be updated by one of our partners before reprogramming and installing UpRev otherwise the idle release function is non-existent and this can cause problems when the engine is idling. The problem can also be fixed by replacing the 2007 computer with a 2008, but this procedure also requires having the vehicle's keys reprogrammed.